Fibers are no longer used in anchoring ships or boats while at sea. The use of chains or anchor chains is now more common today compared to the use of fibres in anchoring ships and boats at sea. There are different types of anchor chains being used.
Some examples of anchor chains in the market include hot dip galvanized chain, zinc plated chain, and the vinyl coated chain. The hot dip galvanized anchor chain is the most sought after anchor chain because of intense ability to resist corrosion.
The zinc plated chain is mainly sold in all hardware stores and is sometimes referred to as an all purpose chain. This chain is shinier than the hot dip galvanized chain. Comparing the price of the zinc plated chain with the hot dip galvanized chain, you will be surprised to discover that the hot dip galvanized chain is a bit cheaper. The vinyl coated chain was mainly created for swing sets and playgrounds. It is important to note that the vinyl coated chain is recommended when you can annually replace it.
Whatever the type of anchor chain you purchase, the ways of using an anchor chain is the same. Instead of holding the immovable weight of a ship or boat, anchor chains dig into the rock bottom. The anchor chain’s ability to dig into the rock bottom is the presence of flukes.
One amazing reason why anchor chains are used is because of the strengthening factor. The anchor chains have the largest weight to working load ratio. The second benefit of using the anchor chains is that their calibration are windlass in nature, which a wildcat with an HT design can perfectly fit in the chains.
Furthermore, the links created by the anchor chains are able to get rid of tangling in any locker. Thirdly, the anchor chains are important since they enable the marine to set at a faster and more reliable rate by building a downward force on the shank.
The fourth benefit of using the anchor chains is that they ensure that the rodes lie horizontally instead of upwards once set. Anchor chains are important since they pass energy to the last part of the anchor handle. Another amazing reason for using the anchor chains is that it permits the use of the breakaway release method and lowers the probability of losing a stuck anchor chain.
There are certain things that you must do when using the anchor chains. First and foremost, make sure to inspect your anchor chain on a regular basis. Check whether the links are aligned with the recess of the wildcats. Moreover, make sure that the wildcat always has a stripper and a steel bar that breaks the connection between the anchor chain and a wildcat. Lastly, make sure that the vessel is connected to the end of an anchor chain.